In late October 2024, a major UK-based telematics provider went down mid-operation. Real-time vehicle tracking, fuel management, and route optimization all stopped working at once, and the disruption rippled through to a global logistics client, causing delivery delays and stock issues for downstream retailers. It was not an isolated event; similar ransomware attacks have left trucking and logistics fleets without visibility into their own vehicles.
The technology that makes a fleet efficient is the same technology that makes it a target. Every GPS tracker, camera, and sensor connected to a vehicle is also a potential entry point for an attacker. And while much of the conversation around telematics cybersecurity focuses on software and firmware, the physical installation of that hardware plays just as large a role in whether a fleet stays secure.
Vehicles and Connected Fleets as Entry Points
A modern commercial vehicle is no longer a closed mechanical system. It is a rolling network of sensors, controllers, and communication channels, each one wired into the vehicle’s core systems to collect and transmit data. That connectivity is what makes telematics valuable and also expands the attack surface. Every device added to a vehicle, from a GPS unit to a dashcam to an ECM interface, is a potential doorway into the fleet’s network if it is not installed and configured correctly.
CAN Bus and OBD-II Vulnerabilities
The OBD-II port and the CAN bus behind it are where most telematics hardware plugs in, and they are also among the most exposed points in a vehicle’s electronics. An improperly secured or poorly configured connection at this port can allow an attacker to read engine data, tamper with device communications, or, worse, interact with vehicle systems that were never designed with cybersecurity in mind. Quality installation matters here more than almost anywhere else. A device that is professionally wired, secured, and configured according to the manufacturer’s specifications closes off many of the easy openings left by a rushed or improvised installation.
GPS Spoofing and Location Data Theft
Fleets depend on accurate location data for routing, dispatch, and safety. GPS spoofing attacks feed a device false positioning information, throwing off routing accuracy and, in more serious cases, allowing bad actors to mask a vehicle’s real location entirely. Theft of location data raises its own risks, from competitive intelligence leaks to physical safety concerns for drivers and cargo. Properly configured devices and secure firmware are the first line of defense, but installation quality still matters. A device that is mounted and connected correctly is far less likely to be tampered with or swapped out undetected in the field.
Cellular and Bluetooth Connection Attacks
Telematics devices constantly transmit data over cellular and Bluetooth connections, and both channels have their own vulnerabilities. Unencrypted cellular communication can be intercepted, and Bluetooth pairings that are not locked down can be hijacked to access or alter data in transit. This is where the installation and configuration of a device meets its ongoing security posture. A technician who correctly sets up encrypted communication channels and disables unnecessary wireless features during installation is closing doors that would otherwise stay open for the life of the device.
Loss of Vehicle Control and Safety System Integrity
The most serious scenario in telematics cybersecurity is an attack that extends beyond data and into vehicle functions themselves. Poorly secured connections to a vehicle’s onboard systems can, in a worst-case scenario, put safety systems at risk. This is precisely why organizations like the FBI and NAFA Fleet Management Association have urged fleet operators not to connect unknown or untrusted devices to the OBD-II port, and why device manufacturers like Geotab build layered protections, including encrypted data transfer and digitally signed firmware updates, into their hardware from the design stage up. Those protections only hold if the device is installed the way the manufacturer intended.
Loss of Customer Trust and Brand Damage
A cyber incident does not stay contained to IT systems. When a telematics breach disrupts operations or exposes data, it damages the trust customers place in every partner involved in that deployment, from the software provider to the installer. Fleet operators, solutions providers, and installation partners share that risk together. A single weak link, whether it is unpatched firmware or a poorly secured install, can expose proprietary data and put an entire partner ecosystem’s reputation on the line.
Installation as a Security Discipline
None of this is meant to suggest that hardware and software vendors carry the whole burden. Installation is where many security intentions either hold up or fall apart. A device engineered with strong encryption and signed firmware updates is only as secure as its physical connection to the vehicle. Technicians who follow manufacturer specifications, secure wiring and connectors properly, and verify configurations before a vehicle leaves the shop are closing gaps that no amount of downstream software security can fully compensate for.
Orbital’s Role in Vehicle Cybersecurity
This is a discipline Orbital takes seriously, well beyond the shop floor. Orbital has sponsored and participated in the CyberTruck Challenge, an invite-only event that brings together OEMs, suppliers, researchers, students, and cybersecurity specialists to advance vehicle security. Orbital’s team, including leadership from IT and operations, works alongside the event’s college participants during the system assessment phase, helping them safely access and reassemble onboard vehicle systems as part of the exercise.
That involvement reflects a broader commitment. As connected vehicle technology continues to evolve, so do the risks that come with it, and Orbital’s role as an installation partner means staying ahead of them rather than reacting to them. Quality installation ensures every connection, every wire, and every configuration supports the security of the fleet it serves.
FAQs
What is the biggest cybersecurity risk in a telematics deployment? The OBD-II port and CAN bus connection are usually the highest-risk points, since that’s where telematics hardware plugs directly into a vehicle’s core systems. An insecure or poorly configured connection can expose engine data, device communications, and in rare cases, vehicle systems themselves.
Can a telematics device really be used to control a vehicle? It’s an unlikely worst-case scenario, but it’s why the FBI and the NAFA Fleet Management Association both recommend against connecting unknown or untrusted devices to the OBD-II port. Reputable manufacturers build in protections like encrypted data transfer and signed firmware updates specifically to prevent this kind of access.
How does installation quality affect telematics security? A device’s built-in security features only work if it’s installed the way the manufacturer intended. Secure wiring, correct configuration, and verified connections close off the openings that a rushed or improvised install can leave behind, even on hardware that’s otherwise well protected.
What is GPS spoofing and why does it matter for fleets? GPS spoofing feeds a telematics device false location data, which can throw off routing and dispatch or, in more serious cases, mask a vehicle’s real position. It affects both operational accuracy and safety, especially for fleets moving high-value cargo.
What role does Orbital play in vehicle cybersecurity? Orbital sponsors and participates in the CyberTruck Challenge, an invite-only event focused on vehicle cybersecurity and workforce development. Orbital’s team works alongside student participants during the event’s system assessment phase and applies that same security-first mindset to every fleet installation.
Learn more about the CyberTruck Challenge at cybertruckchallenge.org.